General android codes you should know

General Codes: *#06# – Display's IMEI number.
*2767*3855# – This code will Format your device to factory state (will delete everything on phone).
*#*#4636#*#* – Display's Phone information, usage statistics and battery.
*#*#273282*255*663282*#*#* – This code will Immediately backup of all media files.
*#*#197328640#*#* – This code will Enable test mode for service.
*#*#1111#*#* – Will display FTA software version.
*#*#1234#*#* – Will show PDA and firmware version.
*#*#232339#*#* – Wireless LAN tests.
*#*#0842#*#* – This code is used for Backlight/vibration test.
*#12580*369# – Display's Software and hardware info.
*#*#2664#*#* – This code is used for Testing the touchscreen.
*#9900# – System dump mode.
*#9090# – Diagnostic configuration.
*#*#34971539#*#* – Will display Detailed camera information.
*#872564# – USB logging control.
*#301279# – HSDPA/HSUPA Control Menu.
*#7465625# – This code will display phone's lock status.
*#0*# – Enter the service menu on newer phones like Galaxy S III.
*#*#7780#*#* – Reset the /data partition to factory state.
Basic Codes: *#*#7780#*#* - This code is used for factory restore setting.This will remove Google account setting and System and application data and settings.
*2767*3855# - This code is used for factory format, and will remove all files and settings including the internal memory storage. It will also re install the firmware.
*#*#4636#*#* - This code show information about your phone and battery.
*#*#273283*255*663282*#*#* - This code opens a File copy screen where you can backup your media files e.g. Images, Sound, Video and Voice memo.
*#*#197328640#*#* - This code can be used to enter into Service mode. You can run various tests and change settings in the service mode. *#*#7594#*#* - This code enable your "End call / Power" button into direct power off button without asking for selecting any option(silent mode, aero plane and power-off). *#*#8255#*#* - This code can be used to launch G Talk Service Monitor. *#*#34971539#*#* - This code is used to get camera information. Please avoid update camera firmware option. W-LAN, GPS and Bluetooth Test Codes: *#*#232339#*#* OR *#*#526# *#* OR *#*#528#*#* -- W-LAN test (Use “Menu” button to start various tests). *#*#232338#*#* -- Shows WiFi MAC address. *#*#1472365#*#* - GPS test. *#*#1575#*#* - Another GPS test. *#*#232331#*#* - Bluetooth test. *#*#232337#*# - Shows Bluetooth device address. Codes to launch various Factory
Tests: *#*#0842#*#* - Device test (Vibration test and BackLight test). *#*#0588#*#* - Proximity sensor test.
*#*#0*#*#* - LCD test. *#*#2664#*#* - Touch screen test. *#*#2663#*#* - Touch screen version.
*#*#0283#*#* - Packet Loopback.
*#*#0673#*#* OR *#*#0289#
*#* - Melody test.
*#*#3264#*#* - RAM version.
Code for firmware version information:
*#*#1111#*#* - FTA SW Version.
*#*#2222#*#* - FTA HW Version.
*#*#44336#*#* - PDA, Phone, CSC, Build Time, Changelist number.
*#*#4986*2650468#*#* - PDA, Phone, H/W, RFC

No comments:

Post a Comment

Help Us To Serve You Better By Sharing This Post And Dropping Your Comments Below

Go Social With Us Via: Facebook And Twitter For Latest Updates